Konges Slojd - Dino Bath thermometer Quarry blue

Product description

Konges Slojd - Dino digital bath thermometer

Our silicone thermometer is a convenient way to check baby's bath temperature. With an accurate digital reading in both °F and °C, you can bathe your baby safely. The bath thermometer is made of waterproof silicone and floats in water.

Bath water measurements

The notification panel will not light up if the temperature is between 30° and the desired temperature. If the temperature is lower than 30 degrees, the display will light up green and the message COOL will appear. If the temperature is lower than 0° then the thermometer will display the following message 'LL.L°C.'

The notification panel will light up red if the measured temperature is higher than the desired temperature, followed by the message HOT. If the temperature is above 80 degrees, the message HOT will be replaced by the message HH.H°C.

The thermometer remains on standby for up to 30 minutes after the measurement. Press any button to switch it back on.

Setting the thermometer

To set the thermometer in the correct unit, press °C/°F to switch from Fahrenheit to Celsius (or vice versa).

To choose the maximum temperature, press the SET button for 3 seconds, then dial '+' to choose the desired temperature. You get a choice between 37°, 38°, 39° or 40°. Press SET again to confirm your choice.

The notification panel is located in a recessed, waterproof area for use in a baby bath.

• Designed in Denmark
• Material: silicone
• Waterproof case
• Temperature measurement between 10° and 50°
• Measuring tolerance up to 1°
• Warranty of 24 months from purchase date
• Batteries: C42032 button cell batteries.
• Size: L 11 cm x W 3.5 cm x H 8.5 cm
• Packaging: L 8 cm x W 3.5 cm H 11 cm

Manual:

When the battery needs replacement, the display will give the following message '2S'.

Can't be sold in the States or UK